GI-S Series
Клеммы ввода-вывода безопасности для CIP Safety(TM)
- Удаленные цифровые блоки безопасности
- Индивидуальные тестовые импульсы для лучшей диагностики
- Поддерживается CIP-безопасность в EtherNet/IP
- Стандартный коммуникационный порт EtherNet/IP
- Отдельный источник питания для логики и S-I/O.
- Может работать как удаленный вход/выход безопасности в сочетании с серией NX-SL5000 с NX-CSG320 или NX102, используя порт 2 A/B.
- Кабели и разъемы промышленного Ethernet серии XS5 XS2 XS6
Спецификации и заказ
| Specifications | I/O capacity | Unit version | Order code | Communication protocol | Number of connectors | Number of networks | Safety inputs | Pulse outputs | Safety outputs (for PNP) |
|---|---|---|---|---|---|---|---|---|---|
| EtherNet/IP | 2 | 1 2 PORT1 and PORT2 are ports with switching hub. | 12 inputs | 12 outputs | 4 outputs | Ver. 1.2 | GI-SMD1624 | ||
| - | GI-SID1224 |
| Certification body | Standards |
|---|---|
| T?V Rheinland | EN ISO 13849-1IEC 61508 parts 1-7IEC/EN 62061IEC/EN 61131-2 |
| UL | NRAQ (UL61010-1, and UL 61010-2-201)NRAG (UL 121201)NRAQ7 (CSA C22.2 No. 61010-1, and CSA C22.2 No. 61010-2-201) |
| Item | Specifications |
|---|---|
| Enclosure | Mounted in a panel (open type) |
| Operating environment | Ambient operating temperature |
| Ambient operating humidity | 10% to 95% (with no condensation or icing) |
| Atmosphere | Must be free from corrosive gases |
| Ambient storage temperature | ?25 to 70°C (with no condensation or icing) |
| Altitude | 2,000 m max. |
| Pollution degree | 2 |
| Insulation class | CLASS III (SELV) |
| Overvoltage category | II |
| EMC immunity level | Zone B: IEC 61131-2 |
| Vibration resistance | Conforms to IEC 60068-2-6 5 to 8.4 Hz with amplitude of 3.5 mm 8.4 to 150 Hz, acceleration of 9.8 m/s 2 100 min. in each X, Y, and Z directions (10 sweeps of 10 min. each = 100 min. total) |
| Shock resistance | Conforms to IEC 60068-2-27 147 m/s 2 3 times in each X, Y, and Z directions |
| Insulation resistance | 20 MOhm between isolated circuits (at 100 VDC) |
| Dielectric strength | 500 VAC between isolated circuits for 1 minute at a leakage current of 10 mA max. |
| Installation method | DIN Track mounting (IEC 60715 TH35-7.5/TH35-15) |
| Degree of protection | IP20 |
| Model | GI-SMD1624 | GI-SID1224 |
|---|---|---|
| Number of safety input points | 12 | |
| Number of safety output points | 4 | - |
| Number of test output points | 12 | |
| OMRON special safety input device 2 OMRON special safety input devices are the following input devices: - Safety mat UMA/UM - Safety edge SGE - Single-beam safety sensor E3ZS - Non-contact door switch D40A/D40Z | Connection unavailable | |
| LED indication | [V0] LED, [IN ? ] LED x 12, [V1] LED, [OUT ? ] LED x 4, [MS] LED, [NS] LED, [PORT ? LINK] LED x 2 | [V0] LED, [IN ? ] LED x 12, [V1] LED, [MS] LED, [NS] LED, [PORT ? LINK] LED x 2 |
| Hardware switch setting |  | |
| Safety input type | IEC61131-2 type3 PNP (sinking inputs) | |
| Safety input current | 6 mA max. | |
| Safety input ON voltage | 11 VDC min. | |
| Safety input OFF voltage/OFF current | 5 VDC max./1 mA max. | |
| Safety output type | Source output (for PNP) | |
| Safety output rated current | 0.5 A max. | 2 GI-SID1224 has no output signal terminal and no output power supply is connected. |
| Maximum total safety output current | 2.0 A | |
| Safety output ON residual voltage | 1.2 V max. (between V1 and each output terminal) | |
| Safety output OFF residual voltage | 2.0 V max. (between G1 and each output terminal) | |
| Safety output leakage current | 0.1 mA max. | |
| Test output type | Source output (for PNP) | |
| Test output rated current | 0.7 A max. | |
| Maximum total test output current | 5.0 A | |
| Test output ON residual voltage | 1.2 V max. (between V0 and each output terminal) | |
| Test output leakage current | 0.1 mA max. | |
| External dimensions 2 Projections are not included. | 170 (W) x 65 (H) x 55 (D) | |
| Weight | 400 g | |
| Number of communications that can be set between NX Units | 254 ports max. 2 Projections are not included. | |
| Unit power supplies | Power supply voltage | 24 VDC (20.4 to 28.8 VDC) |
| Current consumption 2 Inrush current when the supply power is turned ON from the static power-OFF state. Inrush current value may vary depending on conditions. For your selection of fuses, breakers, and external power supply units, take into account the conditions to be used to select those that have a margin in characteristics and capacity. | 250 A max. | |
| Inrush current | On cold start at normal temperature50 A max., 0.1 ms max. | |
| Power supply terminal current carrying capacity 2 Current-carrying capacity allowed to continuously flow through the terminal. This current must not be exceeded in case crossover wiring is done for the unit power supply. | 5 A | |
| Insulation type | No insulation: Between unit power supply terminal and internal circuit | |
| Output power supply | Power supply voltage | 24 VDC (20.4 to 28.8 VDC) |
| Current consumption | 50 A max. | |
| Inrush current | On cold start at normal temperature 50 A max., 0.1 ms max. | |
| Power supply terminal current carrying capacity 2 Current-carrying capacity allowed to continuously flow through the terminal. This current must not be exceeded in case crossover wiring is done for the unit power supply. | 5 A | |
| Insulation type | Photocoupler insulation | |
| External connection terminal | Communication connector | EtherNet/IP communication RJ45 x 2 |
| Screwless clamp terminal block | Top terminal block Functional earthing Unit power supply Input/Test output Bottom terminal block Output power supply Output/Input/Test output | Top terminal block Functional earthing Unit power supply Input/Test output Bottom terminal block Input/Test output |
| Inter-terminal connection diagram | V0/G0 Unit power supply |  |
| V1/G1 Output power supply |  | 2 GI-SID1224 has no output signal terminal and no output power supply is connected. |
| Installation direction and restriction | No restriction | |
| Protective function | Overvoltage protection, overcurrent protection |
| Item | Specifications | GI-SMD1624 / GI-SID1224 |
|---|---|---|
| Communications protocol | TCP/IP, UDP/IP | |
| Support services | Sysmac Studio connection, CIP message communication, DHCP (client) | |
| Number of logical ports | 2 | |
| Physical layer | 100BASE-TX | |
| Transmission specifications | Media access method | CSMA/CD |
| Modulation | Baseband | |
| Transmission path | Star, daisy chain, mixed (star and daisy chain) | |
| Transmission rate | 100M bit/s (100BASE-TX) | |
| Transmission media | Twisted-pair cable (shielded: STP): category 5/5e or higher | |
| Transmission distance | 100 m max. (distance between hub and node) | |
| Number of daisy chain connections | 8 units | |
| CIP messaging service: Explicit message UCMM (non-connection type) | Maximum number of clients that can communicate simultaneously: 8/Logical ports | |
| Implicit (I/O) connection | Exclusive Owner (EO) connection | 1 |
| EtherNet/IP conformance test | CT9 compliant | |
| Ethernet interface | 100BASE-TX Auto Negotiation Auto-MDI |
| Safety I/O terminal | Corresponding unit version/version | Model | Unit version | Safety CPU Unit NX-SL5700 NX-SL5500 | Communication Control Unit NX-CSG320 | Machine Automation Controller NX102- ???? | Sysmac Studio |
|---|---|---|---|---|---|---|---|
| GI-SMD1624 | Ver. 1.2 | Ver. 1.3 | Ver. 1.01 | Ver. 1.31 | Ver. 1.24 | ||
| GI-SID1224 | Ver. 1.2 | Ver. 1.3 | Ver. 1.01 | Ver. 1.31 | Ver. 1.24 |
Правила и стандарты
| Certification body | Standards |
|---|---|
| T?V Rheinland | EN ISO 13849-1IEC 61508 parts 1-7IEC/EN 62061IEC/EN 61131-2 |
| UL | NRAQ (UL61010-1, and UL 61010-2-201)NRAG (UL 121201)NRAQ7 (CSA C22.2 No. 61010-1, and CSA C22.2 No. 61010-2-201) |
Клеммы ввода/вывода безопасности серии GI-S
Протокол FSoE сертифицирован для приложений, в которых устройства OMRON FSoE подключаются друг к другу. Для совместимости с устройствами FSoE, отличными от устройств OMRON FSoE, заказчик должен проверить связь FSoE. Кроме того, клеммы ввода-вывода безопасности серии GI-S были зарегистрированы на соответствие RCM, EAC и KC (корейский регламент радиосвязи).
| Certification body | Standards |
|---|---|
| T?V Rheinland | EN ISO 13849-1IEC 61508 parts 1-7IEC/EN 62061IEC/EN 61131-2 |
| UL | NRAQ (UL61010-1, and UL 61010-2-201)NRAG (UL 121201)NRAQ7 (CSA C22.2 No. 61010-1, and CSA C22.2 No. 61010-2-201) |
Общие характеристики
| Item | Specifications |
|---|---|
| Enclosure | Mounted in a panel (open type) |
| Operating environment | Ambient operating temperature |
| Ambient operating humidity | 10% to 95% (with no condensation or icing) |
| Atmosphere | Must be free from corrosive gases |
| Ambient storage temperature | ?25 to 70°C (with no condensation or icing) |
| Altitude | 2,000 m max. |
| Pollution degree | 2 |
| Insulation class | CLASS III (SELV) |
| Overvoltage category | II |
| EMC immunity level | Zone B: IEC 61131-2 |
| Vibration resistance | Conforms to IEC 60068-2-6 5 to 8.4 Hz with amplitude of 3.5 mm 8.4 to 150 Hz, acceleration of 9.8 m/s 2 100 min. in each X, Y, and Z directions (10 sweeps of 10 min. each = 100 min. total) |
| Shock resistance | Conforms to IEC 60068-2-27 147 m/s 2 3 times in each X, Y, and Z directions |
| Insulation resistance | 20 MOhm between isolated circuits (at 100 VDC) |
| Dielectric strength | 500 VAC between isolated circuits for 1 minute at a leakage current of 10 mA max. |
| Installation method | DIN Track mounting (IEC 60715 TH35-7.5/TH35-15) |
| Degree of protection | IP20 |
ГИ-СМД1624/ГИ-СИД1224
| Model | GI-SMD1624 | GI-SID1224 |
|---|---|---|
| Number of safety input points | 12 | |
| Number of safety output points | 4 | - |
| Number of test output points | 12 | |
| OMRON special safety input device 2 OMRON special safety input devices are the following input devices: - Safety mat UMA/UM - Safety edge SGE - Single-beam safety sensor E3ZS - Non-contact door switch D40A/D40Z | Connection unavailable | |
| LED indication | [V0] LED, [IN ? ] LED x 12, [V1] LED, [OUT ? ] LED x 4, [MS] LED, [NS] LED, [PORT ? LINK] LED x 2 | [V0] LED, [IN ? ] LED x 12, [V1] LED, [MS] LED, [NS] LED, [PORT ? LINK] LED x 2 |
| Hardware switch setting | | |
| Safety input type | IEC61131-2 type3 PNP (sinking inputs) | |
| Safety input current | 6 mA max. | |
| Safety input ON voltage | 11 VDC min. | |
| Safety input OFF voltage/OFF current | 5 VDC max./1 mA max. | |
| Safety output type | Source output (for PNP) | |
| Safety output rated current | 0.5 A max. | 2 GI-SID1224 has no output signal terminal and no output power supply is connected. |
| Maximum total safety output current | 2.0 A | |
| Safety output ON residual voltage | 1.2 V max. (between V1 and each output terminal) | |
| Safety output OFF residual voltage | 2.0 V max. (between G1 and each output terminal) | |
| Safety output leakage current | 0.1 mA max. | |
| Test output type | Source output (for PNP) | |
| Test output rated current | 0.7 A max. | |
| Maximum total test output current | 5.0 A | |
| Test output ON residual voltage | 1.2 V max. (between V0 and each output terminal) | |
| Test output leakage current | 0.1 mA max. | |
| External dimensions 2 Projections are not included. | 170 (W) x 65 (H) x 55 (D) | |
| Weight | 400 g | |
| Number of communications that can be set between NX Units | 254 ports max. 2 Projections are not included. | |
| Unit power supplies | Power supply voltage | 24 VDC (20.4 to 28.8 VDC) |
| Current consumption 2 Inrush current when the supply power is turned ON from the static power-OFF state. Inrush current value may vary depending on conditions. For your selection of fuses, breakers, and external power supply units, take into account the conditions to be used to select those that have a margin in characteristics and capacity. | 250 A max. | |
| Inrush current | On cold start at normal temperature50 A max., 0.1 ms max. | |
| Power supply terminal current carrying capacity 2 Current-carrying capacity allowed to continuously flow through the terminal. This current must not be exceeded in case crossover wiring is done for the unit power supply. | 5 A | |
| Insulation type | No insulation: Between unit power supply terminal and internal circuit | |
| Output power supply | Power supply voltage | 24 VDC (20.4 to 28.8 VDC) |
| Current consumption | 50 A max. | |
| Inrush current | On cold start at normal temperature 50 A max., 0.1 ms max. | |
| Power supply terminal current carrying capacity 2 Current-carrying capacity allowed to continuously flow through the terminal. This current must not be exceeded in case crossover wiring is done for the unit power supply. | 5 A | |
| Insulation type | Photocoupler insulation | |
| External connection terminal | Communication connector | EtherNet/IP communication RJ45 x 2 |
| Screwless clamp terminal block | Top terminal block Functional earthing Unit power supply Input/Test output Bottom terminal block Output power supply Output/Input/Test output | Top terminal block Functional earthing Unit power supply Input/Test output Bottom terminal block Input/Test output |
| Inter-terminal connection diagram | V0/G0 Unit power supply | |
| V1/G1 Output power supply | | 2 GI-SID1224 has no output signal terminal and no output power supply is connected. |
| Installation direction and restriction | No restriction | |
| Protective function | Overvoltage protection, overcurrent protection |
Характеристики встроенного порта EtherNet/IP
В этом разделе описаны характеристики полевой шины терминала безопасности ввода-вывода.
| Item | Specifications | GI-SMD1624 / GI-SID1224 |
|---|---|---|
| Communications protocol | TCP/IP, UDP/IP | |
| Support services | Sysmac Studio connection, CIP message communication, DHCP (client) | |
| Number of logical ports | 2 | |
| Physical layer | 100BASE-TX | |
| Transmission specifications | Media access method | CSMA/CD |
| Modulation | Baseband | |
| Transmission path | Star, daisy chain, mixed (star and daisy chain) | |
| Transmission rate | 100M bit/s (100BASE-TX) | |
| Transmission media | Twisted-pair cable (shielded: STP): category 5/5e or higher | |
| Transmission distance | 100 m max. (distance between hub and node) | |
| Number of daisy chain connections | 8 units | |
| CIP messaging service: Explicit message UCMM (non-connection type) | Maximum number of clients that can communicate simultaneously: 8/Logical ports | |
| Implicit (I/O) connection | Exclusive Owner (EO) connection | 1 |
| EtherNet/IP conformance test | CT9 compliant | |
| Ethernet interface | 100BASE-TX Auto Negotiation Auto-MDI |
Информация о версии
В этом разделе описаны комбинации, которые можно использовать из версий модуля безопасности и модуля управления связью, контроллера автоматизации оборудования и версии Sysmac Studio.
| Safety I/O terminal | Corresponding unit version/version | Model | Unit version | Safety CPU Unit NX-SL5700 NX-SL5500 | Communication Control Unit NX-CSG320 | Machine Automation Controller NX102- ???? | Sysmac Studio |
|---|---|---|---|---|---|---|---|
| GI-SMD1624 | Ver. 1.2 | Ver. 1.3 | Ver. 1.01 | Ver. 1.31 | Ver. 1.24 | ||
| GI-SID1224 | Ver. 1.2 | Ver. 1.3 | Ver. 1.01 | Ver. 1.31 | Ver. 1.24 |